Well Water Filters and Systems
|
Technical Files |
Crystal Clean
Environmentally Friendly Citric Base Spa Cleaner
When to clean your filter
How Crystal Clean works for you
Prevent Scale
No chemical dangers
Removing Baquacil® residues
Eliminate Stains
How to know when is it time to Clean your filter on your spa.
Take your filters out. If the water comes out faster, with more pressure, then it's time to clean your filters.
Soak your filters in a solution of 1/2 ounce Crystal Clean per gallon of water. Leave them in for a day or two.
Your spa will not heat with dirty or gummed up filters!
Bromine causes hard water deposits to build up in the fiber of the filters. Crystal Clean solves this problem!
If you use BaquaSpa®, it's normal for your filter to get gummed up with the by-products of this chemical. Crystal Clean works to remove this gummy residue.
Prevents Scale
No more problems from iron, copper, or calcium scale. Simply add 1 to
3 ounces of Crystal Clean
for every 100 gallons of water when refilling. Use enough to drop the
pH to between 6.5 and 7.2.
Excess minerals will drop out as a solid "dust", easily captured in your filter or vacuumed out.
Clean your filter after a few days, when the water has cleared, and adjust the pH if necessary. Now you won't have to worry about scale and its problems.
If the water remains cloudy shock it daily until clear. We do not recommend clarifiers.
Chlorine or bromine will break down the chemical properties of Crystal Clean, and cause metal corrosion themselves, so regular additions would be necessary if using these chemical treatments.
Cleans Away BaquaSpa® Residues!
If you have used a Biguanide water treatment you now know that it is
incompatible with chlorine, bromine, and many of the minerals commonly
found in our water. That sticky film that forms above the water line and
gums up your filters is also inside all the plumbing of your spa.
Crystal Clean
removes Biguanide residue more efficiently than any other product on
the shelves. You will need to drain your spa of the water with the
Biguanide product in it first, then use
Crystal Clean in fresh water to fully clean your spa. Be
patient! It will take a few days, and your may still have some residual
cloudiness, but soon enough your spa will be clean again.
Eliminates Stains
If you have copper or iron in your spa's plumbing, or in the water
lines that feed your spa, then stains can be a problem. Gas heaters
often have metal manifolds that can leach stains into your water.
The organic ingredients in Crystal Clean are some of the most effective stain removal and preventative agents you can find.
Simply treating your new water with 1 to 3 ounces of Crystal Clean when filling keeps these metals from causing any stains.
Crystal Clean
$24.95
Call us to order!
Our offices are open 7 days a week, 9am to 7pm Pacific Time.
800-860-2477
100% SATISFACTION GUARANTEED
Need something to keep your spa clean, in between draining? Tired of using Chlorine, Bromine, or Baquacil®, ready for something more natural? Try Natural Spa, an all natural enzyme spa treatment.